Caring for Your Ring

A Little Care for Something You Love

Your ring is part of your everyday story. A few thoughtful habits, gentle cleaning, and professional attention when needed can help you enjoy it for years to come.

You do not need to become a jewelry expert. Learn what to look for, know when to take your ring off, and let us help with the maintenance that belongs at a jeweler’s bench.

Round diamond engagement ring with a diamond-set band resting on dark fabric

Small Habits That Make a Difference

Put your ring on after getting ready

Apply lotions, sunscreen, perfume, and hair products before putting your ring on. Residue can build up around the setting and leave the surface looking less bright.

Take it off for hands-on activities

Remove your ring before lifting weights, gardening, handling household chemicals, swimming, or tasks that could strike or put pressure on the setting. Place it somewhere secure before you begin, not on the edge of a sink or in a loose pocket.

Notice changes without testing the ring yourself

Pay attention if a prong starts catching, the band looks bent, or a stone seems to move. Do not pull at the prongs or try to tighten a setting at home. Stop wearing the ring and bring it in for assessment.

Clean Gently, With Your Ring in Mind

Before choosing a cleaning method, consider every part of the ring: the center stone, accent stones, metal, finish, and any treatments. Instructions suitable for one ring may not suit another.

If you are unsure what your ring can tolerate, let us check it first. This is especially important for colored gemstones, pearls, antique pieces, treated stones, and rings with loose or damaged settings.

A gentle routine for a suitable diamond ring

  1. After confirming the method is appropriate for your ring, use lukewarm water with a little mild dish soap in a small bowl.
  2. Clean gently with a soft brush, without forcing bristles beneath delicate settings.
  3. Rinse in a separate bowl of clean water, away from an open drain.
  4. Pat dry with a soft, lint-free cloth.

Avoid toothpaste, abrasive cleaners, bleach, and boiling water. Ask us before using a home ultrasonic cleaner or steam device; the suitability depends on the stones and the condition of the setting.

Hands working beside professional jewelry steam-cleaning equipment
Professional cleaning methods are chosen to suit the individual piece.

Complimentary Rhodium Plating for the Life of Your Ring

Purchased your ring from Van Adams Jewelers? Our rhodium-plating service is complimentary for the life of your ring, a $150 value.

It is one of the ways we continue caring for your purchase long after the day you take it home.

What rhodium plating does

Rhodium plating is a surface finish often used on white-gold rings to give them a bright, white appearance. With wear, that finish can gradually diminish and the underlying metal’s tone may become more noticeable.

Periodic care, not a fixed calendar

How often a ring needs replating varies with the ring and how it is worn. If the finish looks warmer or uneven, bring it in so we can assess whether rhodium plating is appropriate.

Not every metal or design needs this finish. We will help you understand what is right for your ring. Plating refreshes the surface appearance; loose stones, worn prongs, and other repairs need their own assessment.

Ask Us About Rhodium Plating

White-metal halo diamond ring held between fingers for a close view of its setting and finish
A bright finish is part of the ring’s appearance, not a substitute for a secure setting.

Know When to Bring Your Ring In

Make professional checkups part of your routine

Ask us to recommend an inspection schedule suited to your ring and how you wear it. A professional check can identify wear that is easy to miss during everyday use.

Do not wait after an impact or a change

Stop wearing the ring if you notice a moving stone, a newly snagging prong, a bent band, or a change after a hard knock. Keep the ring and any loose parts together in a secure container until they can be assessed.

Ask before assuming a repair is needed

A dull-looking ring may need cleaning, while a worn finish may call for a different service. Let us examine the piece and explain the recommended work, any charges, and expected timing before proceeding.

The complimentary lifetime benefit described above is for rhodium plating on rings purchased from us. Ask separately about any other maintenance or repair your ring may need.

In-House Ring Repairs and Sizing

If your ring needs attention or no longer fits comfortably, our in-house repair team at Van Adams Jewelers in Snellville can help. Bring it in so we can examine its condition, assess the fit, and discuss the work suited to its metal, stones, and design.

We will explain the recommended repair or sizing options, any charges, and expected timing before work begins. Not every ring can be resized in the same way, so an in-person assessment is the best place to start.

Ask About Ring Repairs or Sizing

Give Your Ring a Safe Place to Rest

Store rings separately in a lined compartment or soft individual pouch rather than letting them rub against other jewelry. Choose one secure place at home so removing your ring becomes a habit, not a search later.

For travel, use a case that keeps pieces separated and prevents them from moving around. Avoid wrapping a ring in a tissue, where it can easily be mistaken for rubbish.

If your ring no longer fits securely or has become uncomfortable, ask us to assess the fit rather than continuing to wear it and risk losing it.

Your Ring Care Questions

Is rhodium plating free if I bought my ring from you?

Yes. Van Adams Jewelers provides complimentary rhodium plating for the life of a ring purchased from us, a $150 value. Bring your ring in so we can assess its finish and whether replating is appropriate.

How often should my ring be rhodium plated?

There is no single interval for every ring. Wear and the condition of the finish vary. Ask us to assess your ring when you notice a change in its appearance.

Will rhodium plating fix a loose stone?

No. Plating is a surface-finishing service. A loose stone or worn setting needs a separate assessment before the ring is worn again.

Can I use the same cleaner on all my rings?

Not necessarily. Different stones, treatments, finishes, and settings can need different care. Ask us about each piece before using a cleaner or cleaning device.

Does a lab-grown diamond ring need maintenance too?

Yes. Its setting and finish still need attention, and you should follow care advice suited to the complete ring rather than relying on the diamond’s origin.

Keep Exploring

Diamond Buying Guide and the Four Cs · Natural vs. Lab-Grown Diamonds · Choosing a Diamond Shape

Here for Your Ring, Long After the Purchase

Visit Van Adams Jewelers in Snellville for guidance on your ring’s care, finish, and maintenance. Bring your questions, and we will help you understand the next step.

Book an Appointment

Call (770) 982-2950

Contact us

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.